October weather forecast
Milo, IN

Share

Weather in October

October, the same as September, is another refreshing autumn month in Milo, Indiana, with an average temperature fluctuating between 46.2°F (7.9°C) and 61.7°F (16.5°C).

Temperature

As September transitions to October, the average high-temperature falls from a warm 74.1°F (23.4°C) to a refreshing 61.7°F (16.5°C). Milo's temperature tends to fall to an average low of 46.2°F (7.9°C) during the nights of October.

Humidity

The least humid month in Milo is October, with an average relative humidity of 74%.

Rainfall

In Milo, during October, the rain falls for 11.3 days and regularly aggregates up to 1.06" (27mm) of precipitation. Throughout the year, in Milo, there are 137.2 rainfall days, and 17.95" (456mm) of precipitation is accumulated.

Snowfall

January through April, October through December are months with snowfall. October is the first month it typically snows. Throughout October, in the average 0.5 snowfall days, it receives 0.24" (6mm) of snow. In Milo, during the entire year, snow falls for 35.6 days and aggregates up to 7.64" (194mm) of snow.

Daylight

In October, the average length of the day in Milo, Indiana, is 11h and 7min.
On the first day of October, sunrise is at 7:39 am and sunset at 7:23 pm. On the last day of the month, sunrise is at 8:11 am and sunset at 6:39 pm EDT.

Sunshine

The average sunshine in October in Milo, Indiana, is 6.3h.

UV index

The average daily maximum UV index in October is 2. A UV Index estimate of 2, and below, represents a minimal health hazard from exposure to the Sun's UV rays for ordinary individuals.
Note: In October, the UV index of 2 transforms into the following advice:
While most people are not greatly affected by extended sun exposure, those with fair skin, babies, and children must always have protection. Avoiding the Sun during its peak radiation time around midday is a healthy practice. A wide-brimmed hat is a shield, deflecting up to 50% of harmful UV radiation from eyes. Take careful note! The UV radiation of the Sun can be nearly doubled by snow reflection.
[Resources]

Frequently asked questions

What is the average October temperature in Milo?

October temperatures in Milo, Indiana, vary between a high-temperature of 61.7°F (16.5°C) and a low-temperature of 46.2°F (7.9°C). In July, the average heat index (a.k.a. 'apparent temperature', 'real feel'), which combines air temperature and relative humidity, is calculated to be 87.8°F (31°C).

What is the least humid month in Milo?

October is the least humid month in Milo, with an average relative humidity of 74%.

What is the average humidity in October in Milo?

In Milo, Indiana, the average relative humidity in October is 74%.

How much does it rain in Milo in October?

In Milo, Indiana, during October, the rain falls for 11.3 days and regularly aggregates up to 1.06" (27mm) of precipitation.

When does it start to snow in Milo?

October is the first month it typically snows. Throughout October, in the average 0.5 snowfall days, it receives 0.24" (6mm) of snow.

How many hours of daylight does Milo have in October?

The average day length in October in Milo is 11h and 7min.

What time are sunrise and sunset in October in Milo?

In October, on the first day of the month, sunrise is at 7:39 am and sunset at 7:23 pm. On the last day of the month, in Milo, sunrise is at 8:11 am and sunset at 6:39 pm EDT.

How many hours of sunshine does Milo have in October?

In October, the average sunshine duration is 6.3h.

What is the UV index reading in October in Milo?

The average daily maximum UV index in October in Milo, Indiana, is 2. A UV Index estimate of 2, and below, represents a low health threat from exposure to the Sun's UV radiation.
Average humidity
Average rainfall days
Average snowfall days
Average daylight
Average sunshine
Average sunshine days
Average UV index
Average cloud cover
Average visibility

Average temperature in October
Milo, IN

Average temperature in October - Milo, IN
  • Average high temperature in October: 61.7°F

The warmest month (with the highest average high temperature) is July (81.1°F).
The month with the lowest average high temperature is January (31.6°F).

  • Average low temperature in October: 46.2°F

The month with the highest average low temperature is July (64°F).
The coldest month (with the lowest average low temperature) is January (20.1°F).

[Resources]

Average pressure in October
Milo, IN

Average pressure in October - Milo, IN
  • Average pressure in October: 30.02"Hg

The months with the highest atmospheric pressure are January and November (30.12"Hg).
The month with the lowest atmospheric pressure is June (29.93"Hg).

[Resources]

Average wind speed in October
Milo, IN

Average wind speed in October - Milo, IN
  • Average wind speed in October: 8.9mph

The windiest month (with the highest average wind speed) is January (10.7mph).
The calmest month (with the lowest average wind speed) is August (6mph).

[Resources]

Average humidity in October
Milo, IN

Average humidity in October - Milo, IN
  • Average humidity in October: 74%

The months with the highest relative humidity are January, February and December (83%).
The month with the lowest relative humidity is October (74%).

[Resources]

Average rainfall in October
Milo, IN

Average rainfall in October - Milo, IN
  • Average rainfall in October: 1.06"

The wettest month (with the highest rainfall) is May (2.24").
The driest month (with the least rainfall) is February (0.98").

[Resources]

Average rainfall days in October
Milo, IN

Average rainfall days in October - Milo, IN
  • Average rainfall days in October: 11.3 days

The month with the highest number of rainy days is May (17.5 days).
The month with the least rainy days is February (5.4 days).

[Resources]

Average snowfall in October
Milo, IN

Average snowfall in October - Milo, IN
  • Average snowfall in October: 0.24"

The month with the highest snowfall is February (2.2").
The months with the least snowfall are May, June, July, August and September (0").

[Resources]

Average snowfall days in October
Milo, IN

Average snowfall days in October - Milo, IN
  • Average snowfall days in October: 0.5 days

The month with the highest number of snowfall days is January (9.6 days).
The months with the least snowfall days are June, July, August and September (0 days).

[Resources]

Average daylight in October /
Average sunshine in October
Milo, IN

Average daylight in October / Average sunshine in October - Milo, IN
  • Average daylight in October: 11h and 1min

The month with the longest days is June (Average daylight: 15h and 0min).
The month with the shortest days is December (Average daylight: 9h and 18min).

  • Average sunshine in October: 6h and 2min

The month with the most sunshine is July (Average sunshine: 10h and 0min).
The month with the least sunshine is January (Average sunshine: 3h and 30min).

[Resources]

Average sunshine days in October
Milo, IN

Average sunshine days in October - Milo, IN
  • Average sunshine days in October: 17.8 days

The month with the most sunshine days is November (18.9 days).
The month with the least sunshine days is May (11.3 days).

[Resources]

Average UV index in October
Milo, IN

Average UV index in October - Milo, IN
  • Average UV index in October: 2

The months with the highest UV index are June, July and August (UV index 6).
The month with the lowest UV index is December (UV index 1).

[Resources]

Average cloud cover in October
Milo, IN

Average cloud cover in October - Milo, IN
  • Average cloud cover in October: 40

The month with the most cloud cover is January (Cloud cover 64).
The months with the least cloud cover are July and August (Cloud cover 33).

[Resources]

Average visibility in October
Milo, IN

Average visibility in October - Milo, IN
  • Average visibility in October: 6mi

The months with the highest visibility are January, February, March, April, May, June, July, October, November and December (6mi).
The months with the lowest visibility are August and September (5mi).

[Resources]

Milo, Indiana, USA

Weather forecast for your location

1. Click Locate me button
2. Allow the app to use your location